RE: Aileron trim servo location

Subject:	RE: Aileron trim servo location
From:	Tony Krzyzewski <tonyk@kaon.co.nz>
Date:	Sat, 6 May 2000 12:17:41


I placed mine so that the inboard end was 10cm outboard of the inner 
counterbalance.

This keeps it away from any tip vortex effect and would allow you to add a 
centre
hinge if  ever required. In fact my tech counsellor has already suggested that
I add a third aileron hinge.

Tony

<Prev in Thread]	Current Thread	[Next in Thread>
Aileron trim servo location, William McClellan Re: Aileron trim servo location, aviatordave Re: Aileron trim servo location, Terry Seaver Re: Aileron trim servo location, Fred Fillinger Re: Aileron trim servo location, carl Re: Aileron trim servo location, Tennant Re: Aileron trim servo location, Terry Seaver Re: Aileron trim servo location, carl Re: Aileron trim servo location, carl RE: Aileron trim servo location, Tony Krzyzewski <= Re: Aileron trim servo location, Grahamclk Re: Aileron trim servo location, Rob Waters Re: Aileron trim servo location, Jerry Davis Re: Aileron trim servo location, ami mcfadyean Re: Aileron trim servo location, Graham Singleton

Previous by Date:	Virus delivered by email - ALERT, Tony Krzyzewski
Next by Date:	Virus Attack Update, Tony Krzyzewski
Previous by Thread:	Re: Aileron trim servo location, carl
Next by Thread:	Re: Aileron trim servo location, Grahamclk
Indexes:	[Date] [Thread] [Top] [All Lists]