Brian,
Andair Gascolators are very nice but expensive.
Place the Fuel Filters in plastic trays so leaks are isolated from
aircraft.
To stop glass breaking easily place a equal length of radiator hose over
the
glass, cut length wise to remove when checking filter.
To replace filter or clean out filter, run fuel tanks empty via fuel
drains, or simply crimp fuel line before filter.
Cheers,
Tim
Brian Rauchfuss - PCD wrote:
>
> I am about to put my cockpit module into the bottom and I am considering
> what I can get done before everything gets difficult to get at.
>
> I was thinking about putting in some of the fuel system bits, but I am not
> sure where things go. Where are the two filters mounted where they are both
> secure and easily viewable from the inspection ports? Where is the fuel pump
> usually mounted? How do you route the fuel lines through the tunnel?
>
> Another thing I was thinking about doing was cutting the side holes in the
> fuselage for the spars and aileron controls before I glue to module in, this
> will prevent the aileron control from pushing the skin out slightly. Is this
> a good idea?
>
> Brian
--
Timothy P Ward
12 Waiwetu Street,
Fendalton,
Christchurch,
NEW ZEALAND
Ph. 0064 03 3515166
email ward.t@xtra.co.nz
Mobile 025 2649325
|