Thanks Europa listers,
I'm 100% totally convinced buying the kit from aircraft spruce is not the
best solution.
I'm going to order just Rutan's book and source the materials locally.
lister's have suggested :
That I should use AeroPoxy as used with the Europa. The mix ratio is
different for the
E-Zpoxy. Also, the E-Zpoxy really stinks!
The kit was way over priced.
The foam is inferior as compared to the higher density foam as used with the
Europa.
The amount of materials in insufficient and does not allow for mistakes.
Many Thanks
Paul Sweeting
Paul R. Sweeting - Hyder UNIX Support. ext 45119
HP Certified Professional - System Administration
**********************************************************************
The information contained in this message is intended for the named recipients
only. It may contain privileged and confidential information and if you are not
the addressee or the person responsible for delivering this to the addressee,
you may not copy, distribute or take action in reliance on it. If you have
received this message in error, please notify us immediately by a reversed
charge
telephone call to +44 (0) 1656 765 000
**********************************************************************
|