europa-list (thread)

Have to tell you....., Fergkyle, 2001/03/31
Rotax 912/914 Valve Spring Retainer Fix, Fred Fillinger, 2001/03/31
Air vents, martinstevens, 2001/03/30
Fresh air vents, martinstevens, 2001/03/30
Sleap Fly-In, David Watts, 2001/03/30
- Re: Sleap Fly-In, Jerry Davis, 2001/03/31
- Re: Sleap Fly-In, Graham Singleton, 2001/03/31
Jabiru in a Classic?, Larry Graves, 2001/03/29
- RE: Jabiru in a Classic?, Bob . Harrison, 2001/03/30
List of Mods, ScramIt, 2001/03/29
tailplane balance weight, david joyce, 2001/03/29
Re: Half price Rotax 912S!, ami mcfadyean, 2001/03/29
Wheel AND wing configuration, Glenn Rainey, 2001/03/29
- Re: Wheel AND wing configuration, Graham Singleton, 2001/03/29
- RE: Wheel AND wing configuration, Kevin Klinefelter, 2001/03/30
Jabiru 3300, Tom & Cathy Friedland, 2001/03/28
- RE: Jabiru 3300, Bob . Harrison, 2001/03/28
- Re: Jabiru 3300, Rowland & Wilma Carson, 2001/03/29
Drilling lead weights, Fergkyle, 2001/03/27
Airmaster Prop, John Cliff, 2001/03/27
- Re: Airmaster Prop, DaveBuzz, 2001/03/29
- Re: Airmaster Prop, John Cliff, 2001/03/30
Newest member #A217, ScramIt, 2001/03/27
- Re: Newest member #A217, EuropaChris, 2001/03/27
- RE: Newest member #A217, Bob . Harrison, 2001/03/27
XS Trigear, Steve Pitt, 2001/03/27
- Re: XS Trigear, DaveBuzz, 2001/03/27
- RE: XS Trigear, Bob . Harrison, 2001/03/27
- Re: XS Trigear, Tom & Cathy Friedland, 2001/03/27
- Re: XS Trigear, Fred Fillinger, 2001/03/27
- Re: XS Trigear, Dr . Christoph Both, 2001/03/28
Date: Mon, 26 Mar 2001 22:15:28 +0100, Bob . Harrison, 2001/03/26
Aft wing fittings, Miles McCallum, 2001/03/26
- RE: Aft wing fittings, Bob . Harrison, 2001/03/26
- Aft wing fittings, Jonathan Moyle, 2001/03/30
Re: Chris Beck, EuropaChris, 2001/03/26
- Chris Beck, flying, 2001/03/26
Thrustline, Nic, 2001/03/25
- Re: Thrustline, Graham Singleton, 2001/03/26
Tri-Gear - Monwheel - Taildragger debate!, Gerry Holland, 2001/03/24
Control Stick Grips, Peter van Schoonhoven, 2001/03/23
- Re: Control Stick Grips, BRYNALL, 2001/03/24
Rotax Service Bulletins - replacement of valve spring, John Cliff, 2001/03/23
- Re: Rotax Service Bulletins - replacement of valve spring, Fred Fillinger, 2001/03/23
Re: Taildragger conversion, Garry Stout, 2001/03/23
- Re: Taildragger conversion, Brian Rauchfuss - PCD, 2001/03/23
- Taildragger conversion, mike . cater, 2001/03/23
- Re: Taildragger conversion, Fergkyle, 2001/03/23
- Re: Taildragger conversion, JLW, 2001/03/23
- Re: Taildragger conversion, Augustene Brown, 2001/03/23
- RE: Taildragger conversion, Bob . Harrison, 2001/03/23
- Re: Taildragger conversion, Augustene Brown, 2001/03/25
- Re: Taildragger conversion, Garry Stout, 2001/03/26
- Re: Taildragger conversion, Terry Seaver, 2001/03/26
- Re: Taildragger conversion, BRYNALL, 2001/03/26
- Re: Taildragger conversion, Graham Singleton, 2001/03/26
MIR re-entry video, Fergkyle, 2001/03/22
Date: Thu, 22 Mar 2001 08:12:40 -0000, Bob . Harrison, 2001/03/22
Virus Warning!, Eddie and Sue Lindsay, 2001/03/21
- Re: Virus Warning!, Steve & Eileen Genotte, 2001/03/21
Off the path....., Fergkyle, 2001/03/21
SPELTCH ECKER, Fergkyle, 2001/03/20
- Re: SPELTCH ECKER, Graham Singleton, 2001/03/20
- Re: SPELTCH ECKER, Fergkyle, 2001/03/20
Tri-gear Wheel Fairings, Fred Fillinger, 2001/03/19
xs fuselage profile, Michael Gamble, 2001/03/19
- Re: xs fuselage profile, Miles McCallum, 2001/03/19
- RE: xs fuselage profile, Tony Wickens, 2001/03/20
- Re: xs fuselage profile, Sandra Dixon & Jan de Jong, 2001/03/20
- Re: xs fuselage profile, Rowland & Wilma Carson, 2001/03/21
- RE: xs fuselage profile, Gregory Mike, 2001/03/21
- Re: xs fuselage profile, Sandra Dixon & Jan de Jong, 2001/03/23
Disregard, Nic, 2001/03/19
Death and Mayhem, Nic, 2001/03/19
Online Ed, Nic, 2001/03/19
Carb heater tests, BRYNALL, 2001/03/19
- Carb heater tests, BRYNALL, 2001/03/19
P-factor, Nic, 2001/03/19
- Re: P-factor, Bob Jacobsen, 2001/03/19
rotax 912, Amylynrog, 2001/03/19
Re: Date: Sun, 18 Mar 2001, Grahamclk, 2001/03/19
Headset recommendation?, EuropaChris, 2001/03/19
- Re: Headset recommendation?, Brian Rauchfuss - PCD, 2001/03/19
- RE: Headset recommendation?, Rob Housman, 2001/03/19
- Re: RE: Headset recommendation?, EuropaChris, 2001/03/19
- RE: Headset recommendation?, Bob . Harrison, 2001/03/19
- Re: Headset recommendation?, Rowland & Wilma Carson, 2001/03/19
- Re: Headset recommendation?, John Cliff, 2001/03/21
- Re: Headset recommendation?, kim prout by way of Rowland & Wilma Carson, 2001/03/22
- Re: Headset recommendation?, flying, 2001/03/23
- Re: Headset recommendation?, ellisonair, 2001/03/27
Re: Mac Grips, Fred Fillinger, 2001/03/19
- Mac Grips, Jerry Davis, 2001/03/19
- RE: Mac Grips, Bob . Harrison, 2001/03/19
- Re: Mac Grips, Grahamclk, 2001/03/19
Date: Sun, 18 Mar 2001 16:12:05 -0000, Bob . Harrison, 2001/03/18
Gasculator/fuel selector, Rob Neils Ph . D ., 2001/03/18
- Re: Gasculator/fuel selector, Steve & Eileen Genotte, 2001/03/18
Access to Matronic's Lists Archives, Eddie and Sue Lindsay, 2001/03/17
spanner in the works, Rowland & Wilma Carson, 2001/03/17
Home Again, Unaturally, Steve & Eileen Genotte, 2001/03/17
Control stick diameter, ami mcfadyean, 2001/03/17
- Re: Control stick diameter, Grahamclk, 2001/03/17
- Re: Control stick diameter, jronjones, 2001/03/17
- Re: Control stick diameter, Graham Singleton, 2001/03/18
- RE: Control stick diameter, Bob . Harrison, 2001/03/18
- Re: Control stick diameter, Miles McCallum, 2001/03/18
T Dragger, Nic, 2001/03/16
- Re: T Dragger, Graham Singleton, 2001/03/17
Dragger, Nic, 2001/03/16
Tail dragger XS3300, Nic, 2001/03/16
- Re: Tail dragger XS3300, Fred Fillinger, 2001/03/16
- Re: Tail dragger XS3300, Graham Singleton, 2001/03/16
- RE: Tail dragger XS3300, Bob . Harrison, 2001/03/17
- Re: Tail dragger XS3300, John Cliff, 2001/03/17
Virus in Message ?, John Cliff, 2001/03/16
Kak Kak, Fergkyle, 2001/03/16
Thanks, MJKTuck, 2001/03/15
List Support Site, John Cliff, 2001/03/15
- List Support Site, John Cliff, 2001/03/26
Engine Thrustline, Tom & Cathy Friedland, 2001/03/15
- Re: Engine Thrustline, Tom & Cathy Friedland, 2001/03/16
- Re: Engine Thrustline, Fred Fillinger, 2001/03/16
- Re: Engine Thrustline, Tom & Cathy Friedland, 2001/03/16
- RE: Engine Thrustline, Bob . Harrison, 2001/03/16
- Re: Engine Thrustline, Fred Fillinger, 2001/03/16
- Re: Engine Thrustline, John Cliff, 2001/03/19
Popham Foreign Invitation Fly-in date, David Watts, 2001/03/15
Hardware problem, Grahamclk, 2001/03/14
- RE: Hardware problem, Sweeting Paul, 2001/03/16
OBAM Defined, Eddie and Sue Lindsay, 2001/03/13
- Re: OBAM Defined, Fred Fillinger, 2001/03/13
- Re: OBAM Defined, Fergkyle, 2001/03/14
- RE: OBAM Defined, Bob . Harrison, 2001/03/14
- Re: OBAM Defined, Fergkyle, 2001/03/14
- Re: OBAM Defined, Graham Singleton, 2001/03/15
- RE: OBAM Defined, Tony Krzyzewski, 2001/03/15
- RE: OBAM Defined, Bob . Harrison, 2001/03/15
- RE: OBAM Defined, Bob . Harrison, 2001/03/15
- Re: OBAM Defined, hedley brown, 2001/03/15
- Re: OBAM Defined, hedley brown, 2001/03/16
RE: Mod43-tailwheel, Emmet E . Welch, 2001/03/13
- Mod43-tailwheel, Fergkyle, 2001/03/13
No Subject, Bob . Harrison, 2001/03/12
FW:, Bob . Harrison, 2001/03/12
Date: Mon, 12 Mar 2001 21:37:38 -0000, Bob . Harrison, 2001/03/12
Trailers, Paddy Clarke, 2001/03/12
- Re: Trailers, Roger Anderson, 2001/03/12
- Re: Trailers, Grahamclk, 2001/03/12
- RE: Trailers, Steve Hagar, 2001/03/12
- Re: Trailers, David Watts, 2001/03/12
- Trailers, Alan Stewart, 2001/03/12
- Re: Trailers, TroyMaynor, 2001/03/13
- Trailers, Roger Anderson, 2001/03/14
- Re: Trailers, jronjones, 2001/03/15
Re: Date: Mon, 12 Mar 2001 16:20:25 -0000, Dave DeFord, 2001/03/12
- Date: Mon, 12 Mar 2001 16:20:25 -0000, Bob . Harrison, 2001/03/12
Aero-Electric list at Matronics, Fergkyle, 2001/03/12
- Re: Aero-Electric list at Matronics, Ira Rampil, 2001/03/12
AeroElectric-List at Matronics, Eddie and Sue Lindsay, 2001/03/11
Fill and Bake, or Bake and Fill?, djgeldermann, 2001/03/11
- Re: Fill and Bake, or Bake and Fill?, Dave DeFord, 2001/03/12
- RE: Fill and Bake, or Bake and Fill?, Bob . Harrison, 2001/03/12
- Re: Fill and Bake, or Bake and Fill?, Miles McCallum, 2001/03/12
- Re: Fill and Bake, or Bake and Fill?, Fred Fillinger, 2001/03/14
- Re: Fill and Bake, or Bake and Fill?, Fred Fillinger, 2001/03/16
- Re: Fill and Bake, or Bake and Fill?, Fergkyle, 2001/03/16
- Re: Fill and Bake, or Bake and Fill?, Fred Fillinger, 2001/03/17
- Re: Fill and Bake, or Bake and Fill?, Eddie and Sue Lindsay, 2001/03/17
trailer for sale UK, Rowland & Wilma Carson, 2001/03/11
Tailwheel spring/arm set up, Emmet E . Welch, 2001/03/11
- RE: Tailwheel spring/arm set up, Emmet E . Welch, 2001/03/12
- Re: Tailwheel spring/arm set up, Roger . Mills, 2001/03/12
- Re: Tailwheel spring/arm set up, Dr . Christoph Both, 2001/03/12
- Re: Tailwheel spring/arm set up, TroyMaynor, 2001/03/12
- Re: Tailwheel spring/arm set up, Graham Singleton, 2001/03/12
- Re: Tailwheel spring/arm set up, TroyMaynor, 2001/03/13
- Re: Tailwheel spring/arm set up, Graham Singleton, 2001/03/13
Air traffic control - out of control, Al Fuller, 2001/03/10
Re: [Re: [Re: [Composite Materials Practice Kit]]], Andrew Sarangan, 2001/03/10
Digital level source, Miles McCallum, 2001/03/10
New Avionics, Fred Fillinger, 2001/03/10
- RE: New Avionics, John Cliff, 2001/03/12
Bob Nuckolls' List, John Cliff, 2001/03/10
Flying (UK only): 'Foot and Mouth', Alan Stewart, 2001/03/10
Resin pump, ScramIt, 2001/03/10
shocking donuts, Peter Saitta AIA Principal, 2001/03/10
Soldering vs. Crimping Issue, Eddie and Sue Lindsay, 2001/03/09
'Foot and Mouth' Alan & Rowland, bill, 2001/03/09
Re: digital electronic scale, Larry Graves, 2001/03/09
Foot + Mouth [was: Ingress of muck], Rowland & Wilma Carson, 2001/03/09
Flying; Ingress of muck through wheel well., Alan Stewart, 2001/03/08
- Re: Flying; Ingress of muck through wheel well., Roger . Mills, 2001/03/08
- Re: Flying; Ingress of muck through wheel well., Jim Naylor, 2001/03/09
- Re: Flying; Ingress of muck through wheel well., Nigel Charles, 2001/03/11
- Re: Flying; Ingress of muck through wheel well., Jim Naylor, 2001/03/11
RE: Re: Kremen variable pitch props, Bob . Harrison, 2001/03/08
Seat Belt Attachment Route/Spinal Compression, J R \Bob\ Gowing, 2001/03/08
- Re: Seat Belt Attachment Route/Spinal Compression, Shaun Simpkins, 2001/03/08
- RE: Seat Belt Attachment Route/Spinal Compression, Robert Berube, 2001/03/08
- Re: Seat Belt Attachment Route/Spinal Compression, Fred Fillinger, 2001/03/10
- Re: Seat Belt Attachment Route/Spinal Compression, Miles McCallum, 2001/03/10
- Re: Seat Belt Attachment Route/Spinal Compression, J R \Bob\ Gowing, 2001/03/10
Reply Summary: Composite Materials Practice Kit, Sweeting Paul, 2001/03/08
Re: [Re: [Composite Materials Practice Kit]], Andrew Sarangan, 2001/03/07
Mo power, Nic, 2001/03/07
Mo power., Nic, 2001/03/07
Re: Rotax carb heater, BRYNALL, 2001/03/07
Re: Re empty weight, BRYNALL, 2001/03/07
Composite Materials Practice Kit, Sweeting Paul, 2001/03/07
- Re: Composite Materials Practice Kit, Rowland & Wilma Carson, 2001/03/08
- RE: Re: Composite Materials Practice Kit, Bob . Harrison, 2001/03/08
- Re: Re: Composite Materials Practice Kit, Rupert Cutler, 2001/03/09
Re: [Composite Materials Practice Kit], Andrew Sarangan, 2001/03/07
- Re: [Composite Materials Practice Kit], JLW, 2001/03/07
Navaid Servo, Nigel Charles, 2001/03/07
Greetings & question, clevelee, 2001/03/06
Navaid Servo Mounting, Grahamclk, 2001/03/06
Techneeks, Nic, 2001/03/06
Re: NAVAID Aileron Servo, Tom & Cathy Friedland, 2001/03/06
- NAVAID Aileron Servo, Fergkyle, 2001/03/06
UK Flight Restrictions, Eddie and Sue Lindsay, 2001/03/06
- Fw: UK Flight Restrictions, david joyce, 2001/03/09
CS vs VP, Tony Krzyzewski, 2001/03/06
Re: Navaid devices servo, Fred Fillinger, 2001/03/06
- Navaid devices servo, Miles McCallum, 2001/03/06
- Re: Navaid devices servo, Terry Seaver, 2001/03/06
- Re: Navaid devices servo, Bill McClellan, 2001/03/06
- Re: Navaid devices servo, Bill McClellan, 2001/03/06
- Re: Navaid devices servo, Miles McCallum, 2001/03/06
- Re: Navaid devices servo, Graham Singleton, 2001/03/07
- Re: Navaid devices servo, Nigel Charles, 2001/03/07
- Re: Navaid devices servo, Nigel Graham, 2001/03/07
Filling and SandingTechniques, Andrew Sarangan, 2001/03/05
- RE: Filling and SandingTechniques, Steve Hagar, 2001/03/05
- RE: Filling and SandingTechniques, Bob . Harrison, 2001/03/06
EGAD....., Fergkyle, 2001/03/05
Europa Bulletin no. 21, Fergkyle, 2001/03/05
Re: Syringe for dispensing resin & hardner, John Cliff, 2001/03/05
Kit for sale, Paul Mansfield, 2001/03/05
Tie downs, Steve Pitt, 2001/03/04
- Re: Tie downs, Fred Fillinger, 2001/03/04
- RE: Tie downs, Bob . Harrison, 2001/03/05
Maillist Archive is Online, Gerry Holland, 2001/03/04
Searchable Maillist Archive is Online, Andrew Sarangan, 2001/03/04
- Re: Searchable Maillist Archive is Online, Stefan Ridderheim, 2001/03/04
- RE: Searchable Maillist Archive is Online, Chuck Popenoe, 2001/03/04
- RE: Searchable Maillist Archive is Online, Rick Sivier, 2001/03/04
- Re: Searchable Maillist Archive is Online, Rowland & Wilma Carson, 2001/03/05
Storing Decanted Hardener Response, Tony Renshaw, 2001/03/03
Steam Gauges., Nic, 2001/03/03
Soldering/crimping, Fergkyle, 2001/03/03
Re: Dremels, Fred Fillinger, 2001/03/03
- Dremels, Roger Anderson, 2001/03/03
- Re: Dremels, David Watts, 2001/03/03
RE: Kremen variable pich props, Bob . Harrison, 2001/03/03
- RE: Kremen variable pich props, Dr . Christoph Both, 2001/03/03
- Kremen variable pich props, Cafe St Tropez, 2001/03/03
- Re: Kremen variable pich props, Graham Singleton, 2001/03/03
- Re: Kremen variable pich props, David Watts, 2001/03/03
- RE: Kremen variable pich props, Chris Cameron, 2001/03/05
- Re: Kremen variable pich props, Jerry Davis, 2001/03/05
- Re: Kremen variable pich props, ami mcfadyean, 2001/03/05
- Re: Re: Kremen variable pich props, BRYNALL, 2001/03/06
- Re: Kremen variable pich props, Henk Roelofs, 2001/03/06
- Re: Kremen variable pich props, david joyce, 2001/03/06
- Re: Re: Kremen variable pich props, Roger . Mills, 2001/03/07
- Re: Kremen variable pich props, Cafe St Tropez, 2001/03/07
- Re: Re: Kremen variable pich props, David Watts, 2001/03/07
- Re: Re: Kremen variable pich props, DuaneFamly, 2001/03/07
- Re: Re: Kremen variable pich props, Graham Singleton, 2001/03/08
Crimping...., Fergkyle, 2001/03/02
- Re: Crimping...., Fred Fillinger, 2001/03/03
- Re: Crimping...., Brian Rauchfuss - PCD, 2001/03/06
- Re: Crimping...., Fred Fillinger, 2001/03/06
- Re: Crimping...., Nigel Charles, 2001/03/07
- Re: Crimping...., Jerry Davis, 2001/03/07
- Re: Crimping...., Fergkyle, 2001/03/09
- Re: Crimping...., John Cliff, 2001/03/09
Re: Out of the Closet, John & Anne, 2001/03/02
- Re: Out of the Closet, Steve & Eileen Genotte, 2001/03/02
molex crimp tool, Rowland & Wilma Carson, 2001/03/02
- Re: molex crimp tool, Fred Fillinger, 2001/03/02
Attaching Landing gear mounting frame, Chris Napier, 2001/03/02
- RE: Attaching Landing gear mounting frame, Rob Housman, 2001/03/02
- Re: Attaching Landing gear mounting frame, Fred Fillinger, 2001/03/02
- Re: Attaching Landing gear mounting frame, jronjones, 2001/03/02
- Re: Attaching Landing gear mounting frame, Fergkyle, 2001/03/02
Re: Cabin Ventilation, Shaun Simpkins, 2001/03/02
RE: Laptop navigation., Rob Housman, 2001/03/01
- Re: Laptop navigation., Fred Fillinger, 2001/03/01
- Re: Laptop navigation., Grahamclk, 2001/03/02
- Laptop Navigation., Nic, 2001/03/03
Bill gates and beer, Miles McCallum, 2001/03/01
- RE: Bill gates and beer, Tony Krzyzewski, 2001/03/02
Re: Fitting the rudder & fin cap, Miles McCallum, 2001/03/01