Erich D Trombley wrote:
> I was wondering if anyone has experienced problems with rigging their
> wings. I have no difficulty getting in the port wing, however, the
> starboard is another story. Unfortunately, one does not have good access
> to the tunnel to look for conflicts. I have removed the spar cup on port
> wing and the only thing I can think of is maybe there is binding with the
> fiberglass containment straps that are layed up to the port spar as part
> of the MTOW modification. However, when I rig the wings outside of the
> plane everything goes together just find. Also it is very difficult to
> remove the S.B. wing and I mean difficult. One last observation, if I
> rig the S.B. without the port wing installed it goes in fine. Any
> thoughts out there? Thanks
>
> Erich Trombley
> A028
> Las Vegas, NV
> ________________________________________________________________
We have a similar problem with our wing rigging and
will be interested in any private responses you may
get that might help.
The problem may be interference with the fuel tank
top shelf, which we had problems with before.
Terry Seaver
A135
|