Hi! Garry,welcome aboard!.
I personally didn't bother with resin pumps, other than the type you screw
into the bottle (like the present day liquid hand soap pumps)
Amway do one with a good reach drogue.(Needs modifying to fit the bottle
tops though) Ohaus do a 200gm digital weigher. In the time you are
"fannying" about with more sophisticated pumps you could be on with your
project proper!
I seem to recall a certain Phillip Harris Scientific Ltd. supply the
weigher.
I reckon they are in HULL. If you can't turn them up come back to me ,I
happen to be in a rush at present. Just remember your five times table for
the proportion of mix. starting with the hardener first direct into a pot on
the weigh scale then the resin needs to be added to make the total five
times greater, You only need to be accurate with the resin addition then. I
got quite adept pouring straight from the bottles.
Regards
Bob Harrison G-PTAG Europa Kit 337/Jabiru3300
> -----Original Message-----
> From: owner-europa@aztec.houxou.com
> Subject: Introductions
>
>
> I'd like to introduce myself as a new Europa builder, and make
> the first of
> probably many requests for help. My name is Garry Copeland. I live just
> outside Maidenhead in the UK. I've
> recently taken delivery of kit 1 of a mono-wheel XS. Lurking on this list
> was one of the deciding factors in selecting a Europa.
>
> I have just about completed my workshop set up. Can any UK builders
> recommend a source for a resin pump and a suitable electronic
> scale. I would
> be happy to consider good second hand items.
>
> Thanks.
> Garry Copeland
>
>
|