I have posted photos and some explanation re. nav light/pitot conduit on
my web site - www.my-bits-and-pcs.com/europa
--- begin forwarded text
Date: Thu, 08 Nov 2001 08:26:59 +0100
From: "Alfred Buess" <Alfred.Buess@shl.bfh.ch>
Subject: Wing to fuselage connection of tubes and wires
Hi folks,
The manual says nothing about the way to bring the pitot/static tubes
and the several wires from the wing roots to the inside of the fuselage.
There are certainly some clever solutions spread over the entire globe
or even a best practice, but I don't know it. Besides the pitot/static
tubes I have strobes and navlights on both wings (3 wires plus ground on
each side) and the RightAngle AOA sensor (2 wires). I am especially
interested in clever connection solutions (is it bad practice to use ONE
connector for the strobe wires (high voltage) and the sensor wires?) and
the entry point/routing in the fuselage. Thanks in advance for any hint
and advice.
Alfred Buess, Switzerland
Hybrid monowheel #097 HB-YKI
[vCard Bu privat.VCF]
[attachment omitted]
--- end forwarded text
|