Message text written by Erich D Trombley
> - - - - - . What I am looking for is
a circuit that will turn off the LED after the gear has been successfully
raised say 1 minute after the LED is lighted. I really don't want to see
two bright LED during the entire flight.
<
In our cct we use a tricolour LED for each wheel. While the gear is
moving down it is yellow and when down & locked it changes to green.
When the gear is moving up it changes to yellow and when up and locked it
changes to red which then gradually fades out. The cct is on out web site
:- www.systemwise.co.uk/europa
Regards
Ted
G-ZTED
|