Not forgetting that the notch can also be made by building-up with filler on the
top of the rudder behind the notch.
Duncan McFadyean
On Wednesday, April 17, 2002 1:32 PM, John & Amy Eckel [SMTP:eckel1@comcast.net]
wrote:
>
> ----- Original Message -----
> From: "Stephen Dunn" <steve100557@hotmail.com>
> Subject: rudder core
>
>
> > Just started shaping the rudder core and I read somewhere that there is a
> > problem with the leading edge tip hitting the fin when the rudder is
> > deflected to the left. Is this a problem, and if so is it something I can
> > address at this stage? The manual isn't very specific about the shape of
> the
> > tip. Also, do the hinges need to be treated before being bonded to the
> > rudder? Thanks,
> > Steve
> >
> >
> >
> >
> >
> >
|