In a message dated 4/21/02 10:36:52 PM Eastern Daylight Time,
kbcarpenter@comcast.net writes:
<< Seems to me it would be
ideal for the vent tube to be long enough to go forward to the front top of
the tank since the tail is lower and that is the likely last place for air
when sitting on the ground.
Ken Carpenter
A123 MonoMG >>
Hi,
I have an early classic kit and I had to add a mod to do exactly this. The
vent tube is now extended by an aluminum tube to reach the most forward and
upper corner of the tank. I believe it was optional mod # 34. Still though,
without it, you should have been able to get more than 12 gallons in before
it squirted out the top. Not sure what would cause your problem. I plan to
add a vent at the filler neck teeing into the vent line that exists and is
routed up to the top then back down to the belly.
Best Regards,
Troy
N120EU Monowheel Classic
troymaynor@aol.com
|