Hi Richard,
I did mine about three months ago and I also thought it tight. However
the Mac Servo does move it and doesn't seem to be straining. I used a PP3
battery (9v) to test the thing and even with the limited current drain from
a dry cell it moved from end stop to stop ok.
Alan
#303
----- Original Message -----
From: "Richard Iddon" <riddon@btinternet.com>
Subject: trim tab damper assembly
> I have just put together the trim tab (anti servo) damper assembly which
> connects to the servo unit. I have no experience of this but it seems
very
> tight to me. With the end of the drilled bolt only just through the nyloc
> nut, I can only just move the damper asembly up and down the slot with my
> thumbs. Is this right? I was wondering if the servo unit could handle the
> amount of force needed to move it.
>
> Richard Iddon (XS Tri 533)
>
>
|