Hi Troy,
The Skydrive kit included a small water valve that can be remotely mounted. We
mounted ours on top of the pilot side footwell, and used a solid wire control
cable to allow actuation from the cockpit. The included temperature gauge is a
battery operated digital unit about two inches wide by 3/4" high by 1" deep,
with
a probe on a fairly long wire that inserts into the carb heat block.
Terry
TroyMaynor@aol.com wrote:
> In a message dated 8/26/02 12:31:03 PM Eastern Daylight Time,
> terrys@cisco.com writes:
>
> << We installed the Skydrive carb heat kit in our XS with 912S. We initially
> left it on all the time, assuming there would be no loss of performance.
> After having some problems with hot starts, we decided to install the
> provided valve and temp
> gauge. >>
>
> Hi Terry,
> So you are saying the valve can be opened with a switch on the panel? How big
> is the temp gauge?
> Troy
|