Hi! Steve.
All four places ..... front back port and starboard, you need a strong
structure here!
Sounds like you will soon be ready to fit my Torque tube clamp Mod.? !
Regards
Bob Harrison G-PTAG
-----Original Message-----
From: forum-owner@europaclub.org.uk
Subject: Both sides of the story
OK ... so, I installed my rear bulk head and moved on, not giving it a
second
thought, when in comes my friend and fellow plane builder. He looks at the
manual and says "when are you going to put the other lay-up on the bulk
head," and I say what lay-up? I'm done.
The manual says: (page 18-3)
Lay-up tapes of 2 plies of bid at +- 45 deg into the corners all around both
sides lapping up to the top of the joggle."
Ahhh there's the problem, He read both sides to mean front and back, and I
took it to mean left and right. John says it has to be front and back would
anyone just lay-up the right or left side? Well, he has me there. So.... Is
it front and back or left and right?
Thanks,
SteveD
A217
http://homepage.mac.com/sdunsmuir/Europa.html
|