We use one of these labeling devices in our stockyard and I have used it
on D-EHBT. They are great but cost about 50 Euro/USD. You can write
white on black or black on white or several other colours.
Barry Tennant
"R.C.Harrison" schrieb:
>
> Hi! All.
> I used (I would say with good clear effect!) yellow adhesive tape with black
> printing produced by an electronic labeller. My neighbour is an electrical
> contractor and amongst other things produces electrical panels for factories
> control systems. I believe the kit is called a "Brother". The type size and
> style is very variable and although the tape is about 1/2" wide with a pair
> of small sissors the labels can be sized to suit. Anyone interested in more
> detailed name of the kit mail me direct and I'll research the full name and
> supplier. (Too expensive for an individual to justify but the Europa Club
> may be interested?) Otherwise if you can find one local to you you could get
> some labels produced as you require.
> Regards
> Bob Harrison.
> PS I'll attach a photo of part of my panel for you to visit on the
> http://www.crix.org.freeserve.co.uk/europa/htm support site if John
> Cliff/Jeremy Davey will kindly oblige? You will need to magnify the picture
> to 100% (which incurrs some fuzz unfortunately) then scroll arround
> particularly to find the Aircraft Limitations and the hand brake items which
> are in black and white.
>
> -----Original Message-----
> From: forum-owner@europaclub.org.uk
> Subject: Re: Inst. Panel. Placarding
>
> Have you tried a proper laminating process rather than the lacquer ?
>
> Use thin-ish laminating material and keep it square through the machine so
> it doesn't end up with a twist or a curl.
>
> Engine to be started for the first time this week. Wings in the paint shop.
> Airmaster AD to be performed tomorrow (fill void with setting gunge).
> registration confirmed by the CAA.
>
> Richard
> Richard F.W. Holder 01279 842804 (POTS)
> Bell House, Bell Lane, 01279 842942 (fax)
> Widford, Ware, Herts, 07860 367423 (mobile)
> SG12 8SH email : rholder@avnet.co.uk
> PA-28-181 : Piper Archer : G-JANA, EGSG (Stapleford)
> Europa Classic Tri-gear : G-OWWW, being built.
>
> > From: "William Mills" <combined.merchants@virgin.net>
> > Date: Sun, 1 Dec 2002 18:49:19 -0000
> > Subject: Inst. Panel. Placarding
> >
> > All,
> > In the past I have produced all the necessary placards and signs for my
> panel
> > on my P.C. by printing white letters on a black background on photo
> quality
> > paper and lacquering the surface to stabilise. I use double sided tape to
> > attach. However, after a while the paper starts to de-laminate and curl
> at
> > the edges. Does anyone have any better solutions to offer?
> > Regards to All,
> > William
>
>
|