Carl Hi!
> Has anyone installed the Europa factory stall warner kit on a classic
> Europa.
>
Not a Classic sorry but an XS Wing that had been 'closed up'. Still
easier than Classic I know but.....
It went well with a little puzzlement as to the direction you have to
drill. Some 'blind' faith needed but it all works well although finding
and grabbing
the welding wire 'pull through' needed a little patience. When
completed it looks fine and will cause little cosmetic change if any.
>
>
> Drilling two holes (one from leading edge and one from wing root) in
> the
> hope that they will meet up seems a little hit and miss though
> admittedly
> cant think of a better way of doing this. Unfortunately you only get
> one
> chance of getting it right.
>
It's OK. Just seems a little scatty!
> We would appreciate any advice / comments from anyone who has already
> done
> this mod, thereby increasing our chances success.
Getting a good cutting tube and drilling slowly and carefully is a
start. Using a strong rigid template to position L/E hole helped.
It will be fine. Just seems a little crazy at first.
Regards
Gerry
Gerry Holland
gholland@gemini-resourcing.com
+44 7808 402404
Gemini Resourcing Limited
Hartham Park, Corsham, Wilts. SN13 0RP - UK
+44 1249 700630
+44 1249 700631 (Fax)
Website - http://www.gemini-resourcing.com
DISCLAIMER: This message may contain privileged and confidential
information.
If you think for any reason this message has been addressed in error
you must
not copy or disseminate it and we would ask you to notify us
immediately by
return email to info@gemini-resourcing.com. Internet emails are not
necessarily
secure. Gemini Resourcing Limited is registered in England with its
address at:
Hartham Park, Corsham, Wilts. SN13 0RP, England.
|