And if you have a wet pool or just a bit much epoxy in the bottom you can
wick it out with a piece of paper towel.
JR (Bob) Gowing, No 327 in Oz
----- Original Message -----
From: "Graham Singleton" <grasingleton@avnet.co.uk>
Subject: Re: aileron hinge flange BID size
> >Rowland
> >Yes , You will have to overlap the BID strips. An one inch overlap will
be
> >OK.
> >
> >Keeping the BID from stretching out of shape is the hardest parent.
> >Cliff Shaw
>
> The easy way is to wet out the BID on the bench. I use stuff we call cling
> film, I think you say Saran Wrap?
> Tape it to the bench, wet out the glass strips then cut the film with a
> Stanley nife and carry it to the job on the film and push it in place,
then
> carefully peel off the film. Finally carefully stipple in with a brush.
> That way the 45 BD doesn't distort and it isn't too wet either.
> Graham
>
----
>
> ---
> Version: 6.0.427 / Virus Database: 240 - Release Date: 06/12/2002
>
----
>
|