Paul Hi!
> Have just spent hours cutting filing and drilling the door latch push
> rods,
> according to the instructions in my build manual. Now discover there
> are
> amended dimensions, and my push rods are 4mm too short.
That's not good! I have built and fitted the same in past few weeks and
would be interested in the Manual Version that is correct.
> Before either fitting them or throwing them away to start again, any
> one done the same and
> what were the consequenses if any.
>
You will be 'mocking up' a few times the latch mechanism and 'travel'
before final fit. Simple question. Does it look anything like it is
anything like an efficient 'shoot bolt' engagement. Others I'm sure
will advise but it may be you can 'make up' this small shortfall by
adjustment of Shoot bolt Fuselage housings.
In short Paul. I could well have done the same as you and sit here in
innocence. My Door engagement seems very well retained with shoot bolts
very well engaged.
Kind Regards
Gerry
Gerry Holland
+44 7808 402404
Europa XS 384
G-FIZY
The greatest enjoyment from existence is living dangerously....
Friedrich Nietzsche
Gerry Holland
gholland@gemini-resourcing.com
+44 7808 402404
Gemini Resourcing Limited
Hartham Park, Corsham, Wilts. SN13 0RP - UK
+44 1249 700630
+44 1249 700631 (Fax)
Website - http://www.gemini-resourcing.com
DISCLAIMER: This message may contain privileged and confidential
information.
If you think for any reason this message has been addressed in error
you must
not copy or disseminate it and we would ask you to notify us
immediately by
return email to info@gemini-resourcing.com. Internet emails are not
necessarily
secure. Gemini Resourcing Limited is registered in England with its
address at:
Hartham Park, Corsham, Wilts. SN13 0RP, England.
|