Re: Europa-List: Attn Jabiru engined Europas

[ivor.phillips <ivor.phillips@ntlworld.com>]

9.0  TORQUE SPECIFICATION FOR BOLTS & NUTS


      Part
      Nom. Dia (mm)
      Torque

      nm   (ft.lbs)

      Spark Plugs
      12mm
     11   (8)

      Cylinder Head Bolts
      5/16"
     34   (24)

      Crankcase Main Studs
     3/8"
     40   (30)

      Flywheel/Gear Bolts
     1/4"
     20   (15)


     5/16"
     24   (18)

      Crankshaft Prop Flange Cap Screws
(Lockwire)
      3/8"
     40   (30)

      Oil Pump Cap Screws
     5/16"
     20   (15)

      Tappet Cover Cap Screws
      1/4"
     7   (5)

      Starter Motor Bolts
      5/16"
     20   (15)

      Carburettor Flange Bolts
     1/4"
     11   (8)

      Engine Mount Plate Bolts
      1/4"
     14   (10)


      5/16"
     16   (12)

      Gearbox Cover Bolts
      1/4"
     14   (10)

      Alternator & Coil Mount Bolts
     1/4"
      14   (10)

      Sump Cap Screws
      1/4"
     14   (10)

      Conrod Bolts
     5/16"
     24   (18)


      Propeller Bolts
      1/4"
     9.5   (7)

      Camshaft Gear Bolts (Lockwire)
      1/4"
     16   (12)


On looking further on the Jabiru engine CD i came across the 3300 engine
torque settings, much the same as the 2200,
regards
ivor phillips
XS476
----- Original Message -----
From: "Ed" <bizzarro@easynet.co.uk>
Subject: Europa-List: Attn Jabiru engined Europas


>
> Guys
>
> We have fitted the Prop extension boss on to the engine. We cannot find
the
> torque info required for the bolts that hold this boss on. Any ideas? I
> think that it is 30 ft/lbs but I don't want to guess.
>
>
> Cheers
>
> Eddie
>
> SouthEastLondonFlyingGroup
> Europa Classic Jabiru 3300
>
>