Excellent. Thanks Ivor.
Ed
on 23/2/03 2:51 pm, ivor.phillips at ivor.phillips@ntlworld.com wrote:
> <ivor.phillips@ntlworld.com>
>
>
> 9.0 TORQUE SPECIFICATION FOR BOLTS & NUTS
>
>
> Part
> Nom. Dia (mm)
> Torque
>
> nm (ft.lbs)
>
> Spark Plugs
> 12mm
> 11 (8)
>
> Cylinder Head Bolts
> 5/16"
> 34 (24)
>
> Crankcase Main Studs
> 3/8"
> 40 (30)
>
> Flywheel/Gear Bolts
> 1/4"
> 20 (15)
>
>
> 5/16"
> 24 (18)
>
> Crankshaft Prop Flange Cap Screws
> (Lockwire)
> 3/8"
> 40 (30)
>
> Oil Pump Cap Screws
> 5/16"
> 20 (15)
>
> Tappet Cover Cap Screws
> 1/4"
> 7 (5)
>
> Starter Motor Bolts
> 5/16"
> 20 (15)
>
> Carburettor Flange Bolts
> 1/4"
> 11 (8)
>
> Engine Mount Plate Bolts
> 1/4"
> 14 (10)
>
>
> 5/16"
> 16 (12)
>
> Gearbox Cover Bolts
> 1/4"
> 14 (10)
>
> Alternator & Coil Mount Bolts
> 1/4"
> 14 (10)
>
> Sump Cap Screws
> 1/4"
> 14 (10)
>
> Conrod Bolts
> 5/16"
> 24 (18)
>
>
> Propeller Bolts
> 1/4"
> 9.5 (7)
>
> Camshaft Gear Bolts (Lockwire)
> 1/4"
> 16 (12)
>
>
> On looking further on the Jabiru engine CD i came across the 3300 engine
> torque settings, much the same as the 2200,
> regards
> ivor phillips
> XS476
> ----- Original Message -----
> From: "Ed" <bizzarro@easynet.co.uk>
> To: <europa-list@matronics.com>
> Subject: Europa-List: Attn Jabiru engined Europas
>
>
>>
>> Guys
>>
>> We have fitted the Prop extension boss on to the engine. We cannot find
> the
>> torque info required for the bolts that hold this boss on. Any ideas? I
>> think that it is 30 ft/lbs but I don't want to guess.
>>
>>
>> Cheers
>>
>> Eddie
>>
>> SouthEastLondonFlyingGroup
>> Europa Classic Jabiru 3300
>>
>>
>
>
>
>
>
>
>
|