Steve,
I ran my vents like you and ran it out the bottom and put it in
the same configuration as the original with a 90 degree bend toward the
front. I also drilled a small hole in the back to protect from plugging.
Even a straight out the bottom with a 45 degree bevel (toward the front)
will work just fine. Just be sure to drill the vent hole in the back to
protect the system from plugging.
Jim Nelson
N15JN
writes:
> <hagargs@earthlink.net>
>
> I just installed my molded fuel manifold, ran the fuel tank
> vent to the
> top of it with a T and am now headed back down the the bottom of
> the
> aircraft. What kind of outlet configuration have people found
> success
> with? A straight tube, a T with 2 outlets, exit behind a small
> fairing, or
> a ram air application as noted for the top side?
>
> Steve
> A143
> Mesa, AZ
>
>
> --- Steve Hagar
> --- hagargs@earthlink.net
>
>
>
>
>
>
>
>
>
>
|