In a message dated 3/24/2003 3:54:18 AM Pacific Standard Time,
hagargs@earthlink.net writes:
> I just installed my molded fuel manifold, ran the fuel tank vent to the
> top of it with a T and am now headed back down the the bottom of the
> aircraft. What kind of outlet configuration have people found success
> with? A straight tube, a T with 2 outlets, exit behind a small fairing, or
> a ram air application as noted for the top side?
>
>
Steve,
I used a vent tube on the bottom that is the same shape as the ones on the
top, but a larger diameter. It is curved forward to provide ram air and has a
smaller hole drilled in the back side - as the plans call for on the top.
After 28 hours, it is working fine.
Dave
A227
|