RE: Europa-List: Re: Fuel line requiremnets for Rotax

[Tony S. Krzyzewski <tonyk@kaon.co.nz>]

>>> The restrictor on the return fuel line is a pin hole.

The 914 manual I have (v2, 1998) doesn't show a restrictor in the return
line! It does however have one in the sight gauge line.

For the 914 the fuel return line must be ....

"a line of low fuel resistance. Maximum pressure loss is 0.1bar.
(1.5psi) between fuel pressure control and tank inlet with both electric
fuel pumps in action. Otherwise the carburetors could flood".

Rotax 914F installation manual 1996 05 10, page 49.

Tony