Steve, I don't have any advance on soap and water, but would urge you to be
very thorough with it, as the release agent contains at least one highly
allergenic substance. Iwent through my whole build process being fairly
casual with the sanding of newly laid fibre glass, without any reaction but
developed a severe allergic lung reaction, (needing a couple of months of
steroid treatment), when I came to sand the moulded sufaces prior to gel
coating them. My chest disease colleague told me that release agents are
notorious for this.----- Original Message -----
From: Steve Hagar <hagargs@earthlink.net>
Subject: Europa-List: Old Question
>
> This question has probably been answered many times before. Since I wasn't
> in that stage of the build where it wasn't important to me it most likely
> went in one ear and out the other. What is the consensus on the most
> effective cleaner for removing the mold release from the outside of the
> fuselage. I started to sand some dry microed divots in my vert stab and
> the stuff started flaking off when sanded.
>
> Steve Hagar
> A143
> Mesa, AZ
>
>
> --- Steve Hagar
> --- hagargs@earthlink.net
>
>
|