John,
I suggest you call Andy at the Factory. This year Andy did Sun 'n' Fun and
Neville is doing Oshkosh, which is a huge help to those of us building
through the summer.
Regards,
Jeremy
Jeremy Davey
Europa XS Monowheel 537M G-EZZA
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of
TELEDYNMCS@aol.com
Subject: Europa-List: Setting wing incidence
Greetings all,
I'm about to tackle setting my wing incidence. The manual says to use the
flap template and a digital level. Got that, but it also says the tollerance
is
.05 degrees. This seems a bit tough to get considering the method employed.
My
template is accurate enough to set the flaps in place, but I don't think I
can
achieve the accuracy needed with the given method.
With R/C stuff we use an incidence level that clamps to the LE and TE level
to the cordline. This seems much more effective, but I don't have one big
enough to make it work.
Since it's Oskosh week all the Europa folks are away. Due to a pregnant Lab
who is set to drop puppies any day now I won't be going to Oshkosh this
year.
Are there any tricks that those who have come before me can offer?
Regards,
John Lawton
Dunlap, TN
A-245
|