Are these pictures of my wing/flap any help to what you are after. If so, they
are easy to make using the wing root as a template. Just for inspiration.}
Reg
Tony Renshaw
Sydney Australia
><jeremycrdavey@btinternet.com>
>
>John,
>
>I suggest you call Andy at the Factory. This year Andy did Sun 'n' Fun and
>Neville is doing Oshkosh, which is a huge help to those of us building
>through the summer.
>
>Regards,
>Jeremy
>
>Jeremy Davey
>
>Europa XS Monowheel 537M G-EZZA
>
>-----Original Message-----
>From: owner-europa-list-server@matronics.com
>[mailto:owner-europa-list-server@matronics.com] On Behalf Of
>TELEDYNMCS@aol.com
>To: europa-list@matronics.com
>Subject: Europa-List: Setting wing incidence
>
>
>Greetings all,
>
>I'm about to tackle setting my wing incidence. The manual says to use the
>flap template and a digital level. Got that, but it also says the tollerance
>is
>.05 degrees. This seems a bit tough to get considering the method employed.
>My
>template is accurate enough to set the flaps in place, but I don't think I
>can
>achieve the accuracy needed with the given method.
>
>With R/C stuff we use an incidence level that clamps to the LE and TE level
>to the cordline. This seems much more effective, but I don't have one big
>enough to make it work.
>
> Since it's Oskosh week all the Europa folks are away. Due to a pregnant Lab
>
>who is set to drop puppies any day now I won't be going to Oshkosh this
>year.
>Are there any tricks that those who have come before me can offer?
>
>Regards,
>
>John Lawton
>Dunlap, TN
>A-245
>
>
|