Re: Europa-List: Cowling-prop clearance

[Nigel Graham <nigelgraham@btclick.com>]

........25 mm is the distance to the front face of the prop flange - not
the back edge of the spinner, which comes back past the flange ;-)

Nigel


----- Original Message -----
From: "Gerry Holland" <gnholland@onetel.com>
Subject: Re: Europa-List: Cowling-prop clearance


Andy Hi!

> I should point out that the Engine Installation Manual has an error in
the
> cowling to spinner clearance dimension.  The dimension that the front
face of
> the cowling should be behind the front of the prop flange is 25mm
(1"), not
> 5mm as stated.  Apologies for the misleading information.

1 Inch!! Are you sure. That seems an incredibly large gap, unsightly
too!

Regards

Gerry