Hi Gerry
The dimension refers to the distance to the front of the cowlings from behind
the
front face of the prop flange. The spinner's rear terminates 20mm behind
the front face of the prop flange, resulting in a 5mm gap.
Regards
Andy
>>> Gerry Holland <gnholland@onetel.com> 16/09/03 11:22:42 >>>
Andy Hi!
> I should point out that the Engine Installation Manual has an error in the
> cowling to spinner clearance dimension. The dimension that the front face of
> the cowling should be behind the front of the prop flange is 25mm (1"), not
> 5mm as stated. Apologies for the misleading information.
1 Inch!! Are you sure. That seems an incredibly large gap, unsightly too!
Regards
Gerry
|