Gerry
Try Aircraft Spruce, look under bungee cords. They are listed in different
lengths. You will need to know the length from the top bar where you wrap the
cord, to the bottom bar.
In my Pitts the bungee cord loop was about half the distance between the two
mounting lugs. It took a special tool to stretch the bungee cord far enough
apart that it could be placed on its mounting lugs.
Jim
N398JB
Gerry Holland wrote:
>
> Can someone steer me towards the details of the single loops of Bungee to
> replace the continuous Bungee system for Europa Nose Gear.
>
> My Nose gear is yet again gone 'soft' and would like to try this new
> approach.
>
> Regards
>
> Gerry
>
> Europa 384 G-FIZY
> Trigear with Rotax 912 and Arplast CS Prop.
> Fuselage painted, Wings being painted, Flying surfaces painted
> Airframe Wiring complete, Full Size Panel 70% done .
> Includes Dynon EFIS, KMD 150, Icom A-200 and SL70 Transponder. AoA Fitted.
> Activity on Panel, Designing Heater Unit, Shoulder Width Mod completed.
>
> http://www.g-fizy.com
> +44 7808 402404
> gnholland@onetel.com
>
|