>
>Did I read that the tank vent should be entirely separate from any other
>vent or
>can my tank vent be t'd into that from the sight guage to the top of the
>filler
>neck and another vent taken from the filler neck to the fuselage bottom?
>Mike Gamble
Mike
I made a tank fitting with three NPT holes,then ran 3/8 tube to near the
top of the filler neck and a second 1/4 tube from the top of the neck to
the bottom (syphon break) It has been PFA approved, mod no. 10823. Several
builders have used this system.
I will shortly order another batch of tank fittings.
Graham
|