Gerry Holland provided the address and phone and fax numbers for LP Aero
Plastics, Inc. to which I will add the part numbers:
Windscreen 1460
Door windows, 1461 and 1462
It has been a few years and I may not recall correctly, but I recall that
mine were shipped from Long Beach, CA (clear replacements for the dark
tinted windows provided with the kit).
Best regards,
Rob Housman
Europa XS Tri-Gear A070
Airframe complete
Irvine, CA
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Dan Bish
Subject: Re: Europa-List: Subcontractor lists?
Bob,
I need my windscreens also and I'm sure there are many others like us.
Dan
A144
N914RB
Tucson, AZ
----- Original Message -----
From: "rlborger" <rlborger@mac.com>
Subject: Europa-List: Subcontractor lists?
>
> Europaphiles,
>
> Does anyone have a list of the subcontractors (U.S., U.K., E.U.) that
> Europa used? Nuts, bolts, screws, bearing, rod-ends and all that
> assorted hardware is available through companies like ACS, Wickes and
> many others. Landing gear structure, engine mounts, wings, cockpit
> modules, etc can only be obtained from those who have the needed
> tooling.
>
> Would there be any possibility that an individual or group of
> individuals (through The Europa Club, for instance) could approach the
> subcontractors to obtain needed parts and/or spares for their kits?
>
> For instance, I have not received my plexi windscreens. I know there
> was a U.S. company that produced them for Europa U.S. If the name and
> contact information for the provider were known, I could contact them
> directly to request a set of windscreens. Or, if it is not feasible
> for them to produce a one-off, I could find out what a minimum product
> run would be and I could locate others who need windscreens and perhaps
> we could assemble a minimum order.
>
> Perhaps some of the Europa folks could assemble this information for us.
>
> Just some ideas.
>
> Good building and great flying,
> Bob Borger
> Europa Kit #A221 N914XL, XS Mono, 914, Airmaster C/S
> http://forum.okhuijsen.org/N914XL
> (75%) tail kit done, wings closed, cockpit module installed, pitch
> system in, landing gear frame in, rudder system in, outrigger mod in,
> Fuselage Top on, lift/drag/flap pins in, wing incidence set. Working in
> - 24 Instrument Panel, 25 Electrical, 27 Setting Wings, 29 Main Gear,
> 30 Fuel System, 32 Tail, 34 Door Latches & 35 Doors.
> 3705 Lynchburg Dr.
> Corinth, TX 76208
> Home: 940-497-2123
> Cel: 817-992-1117
>
>
|