Which port does it use, Paul - the serial COM1? I can try this under
VirtualPC as that might save a few people a headache!
Cheers,
Jeremy
Jeremy Davey
Europa Monowheel 537M G-EZZA
Tail done
Standard XS wings with mods underway
CM installed in fuse (with airbrakes fittings)
1200 build hours to date
Intended fit:
Rotax 914 turbo, Airmaster CS fully-feathering prop
Lots of lights, buttons, switches, gizmos, and alarms
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Paul Boulet
Subject: RE: Europa-List: Throttle setting software
It should also be noted that you must boot your
computer up with DOS (not the dos prompt that comes
with windows) in order for this to run
correctly...took me lots of trial/error before I
figured this out!
Paul Boulet, N914PB
Awaiting test pilot before i can fly
--- G-IANI <g-iani@ntlworld.com> wrote:
> <g-iani@ntlworld.com>
>
> "Does anyone out there have the throttle setting
> software for the 914 they
> can e-mail me? Also any tips or issues on its
> use?"
>
>
> You will find the 914 software on the Europa Factory
> site
> (http://www.europa-aircraft.com/) under Builders
> support. The file is quite
> small and downloads OK. This is the most recent
> version and works OK. If
> you have any questions let me know.
>
> Ian Rickard #505 G-IANI XS Trigear
> Europa Club Assistant Mods Rep
> e-mail mods@europaclub.org.uk
>
>
>
> Contributions
> any other
> Forums.
>
> http://www.matronics.com/chat
>
> http://www.matronics.com/subscription
> http://www.matronics.com/FAQ/Europa-List.htm
> http://www.matronics.com/archives
> http://www.matronics.com/photoshare
> http://www.matronics.com/emaillists
>
>
>
>
>
>
|