Dear all
I have a finger brake kit that is surplus to requirements if anyone is
interested.
I had arrange to return it to Europa but that is, of course, not now
possible.
Dennis Lowe G-NHRJ
On Monday, August 23, 2004, at 09:11 am, G-IANI wrote:
>
> The parts for the Finger brakes are listed below, (If the table looks
> wrong
> turn off HTML, ie use character)
>
> Part Make Model Source contact
> Master Cylinder Jamar US2002X Without levers
> Frank on
> jamar1@gte.net(no known UK source)
>
> http://jamarperformance.com/Default.htm
>
> Reservoir ACS A-315 ACS Page 214, PN.
> A-315
>
> Park brake Matco ACS Page 215, PN
> 06-17200
>
> Connectors Brass Polyflow ACS Page 111
> Straight
> 268P-04x02 Male elbow 269P-04x02
>
> Tubing Original Europa is 6mm and bad fit. Use Nylaflow in
>
> I have talked to Andy about the tubing issue. Europa supply 6mm tube
> but
> 1/4in connectors. This does work but it is too easy for the seal to
> fail.
> It is better if you use 1/4in Polyflow or Nylaflow to match the
> fittings.
>
> Ian Rickard #505 G-IANI XS Trigear
> Europa Club Assistant Mods Rep
> e-mail mods@europaclub.org.uk
> or direct g-iani@ntlworld.com
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com]On Behalf Of Rocketman
> To: europa-list@matronics.com
> Subject: Europa-List: Brake lines - Parking brake valve
>
>
> What is the recommended brake line, for use on a trigear? Also,
> anybody
> have a source for a parking brake valve?
>
> Thanks in advance...
>
> --
> Jeff - A055
> Builders Log: http://www.N55XS.com
>
>
> _-
> =======================================================================
> _-
> =======================================================================
> _-
> =======================================================================
> _-
> =======================================================================
> >
>
>
|