All
I did a Rocky Mountain water temperature probe in the water collector tub
where the "radiator cap" is. I had a welder put a pad on the side of the tub
that I drilled and taped for an 1/8" pipe thread. I think it is working very
well. As I reported earlier its consistent measurements. Look at this link
http://forum.okhuijsen.org/modules.php?set_albumName=WileE&id=A031903H2Otemp&op=modload&name=gallery&file=index&include=view_photo.php
(It is midway down on page #11.)
Cliff Shaw
1041 Euclid ave.
Edmonds, WA 98020
425 776 5555
----- Original Message -----
From: "Steve Hagar" <hagargs@earthlink.net>
Subject: RE: Europa-List: 914 Coolant Temp
>
> Matt:
>
> I put a thermocouple to the outside of the little coolant expansion tank.
> A hoseclamp secures it there with a piece of high temp silicone foam. I
> haven't flown it yet but I got the idea from Dave Deford and Terry Seaver.
> They have been flying their plane for some time.
>
> Steve Hagar
> A143
> Mesa, AZ
|