- " Now people
use the aluminum tube and cut two pieces of the rubber tube to act as a splice
---From the filler port to the aluminum tube then from the aluminum tube to the
tank. "
- while others have substituted the rubber tube by (presumably) better quality
tube (special order at automotive supply store, even comes with copper grounding
cable, but regret I do not know the material), which - if it works - also avoids
possible seeping through the splices between the moulded filler and the
alu and between the alu and the tank.
Regards,
Svein
A225 - now in Norway - fitting doors (hint: Do NOT rely on the cross marked in
the rear of the doors for the shoot bolt bushing hole - follow the manual's
instructions
- and do not rely on even the corrected shoot bolt arm length measurements
in Europa News some time back, make your own measurements!!)
|