Hi, Alan,
Just off to Seattle yet again for a fix of fresh WA air - and some bits for
my plane :-)
Cheers,
Jeremy
Jeremy Davey
Europa Monowheel 537M G-EZZA
Tail done
Standard XS wings with mods underway
CM installed in fuse (with airbrakes fittings)
1200 build hours to date
Intended fit:
Rotax 914 turbo, Airmaster CS fully-feathering prop
Lots of lights, buttons, switches, gizmos, and alarms
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Alan Burrows
Subject: RE: Europa-List: FW: PFA NW Strut Fly-in this Sunday - Manchester
Barton
<alan@kestrel-insurance.com>
Hey Jeremy
Where you going to? Yes I know the USA but where?
Alan
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Jeremy
Davey
Subject: RE: Europa-List: FW: PFA NW Strut Fly-in this Sunday -
Manchester Barton
--> <EuropaFlyer_3@msn.com>
Sorry, Why, but you won't on this occasion. I was just the messenger and
won't be there. I'll be packing my bags for a trip to the land of the
free instead.
Don't worry, I don't mind if you, as an honorary Yorkshireman, add
interest to the amount owed. Keep the rate reasonable, I don't want to
end up having to lug a full keg along :-)
Cheers,
Jeremy
Jeremy Davey
Europa Monowheel 537M G-EZZA
Tail done
Standard XS wings with mods underway
CM installed in fuse (with airbrakes fittings)
1200 build hours to date
Intended fit:
Rotax 914 turbo, Airmaster CS fully-feathering prop
Lots of lights, buttons, switches, gizmos, and alarms
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of
NevEyre@aol.com
Subject: Re: Europa-List: FW: PFA NW Strut Fly-in this Sunday -
Manchester Barton
Hi Jeremy Who,
If the weather is not too bad, I will be there, competing in a F2B
control
line model stunt event.[next to the Police Helicopter]
I'll have that pint you promised me !
Cheers,
Nev.
==
direct advertising on the Matronics Forums.
==
==
==
|