In a message dated 27/11/04 06:25:41 GMT Standard Time, gowingjr@acr.net.au
writes:
> Have you checked that your tyre is aligned with the centreline of the
> fuselage? ie tailwhwheel lines up with the grooves in the tyre?
>
Bob
Yes, I rechecked this morning, and the alignment is correct. So I don't
really understand why I should be having this problem. My fuselage is one of the
batch in which the metal reinforcement insert for the bottom tube of the landing
frame was in the wrong place, so my theory is that the guys making the
fuselage were having an off day and got the dimensions of the tunnel slightly
wrong
as well.
Fortunateluy there is a solution: a bulge housing for the main brake
cylinder, and turning the brake caliper by 90 degrees.
John
XS Monowheel kit 536 G-JHKP
|