Why does it have to be "locked" in the vertical position? If it were
attached to a "mid-point" on the shoulder belt it would be prevent from
rotating forward by the belt; doesn't matter if its rotates backwards.
Duncan McF.
----- Original Message -----
From: "Edward Gladstone" <Ted_Gladstone@COMPUSERVE.COM>
Subject: Europa-List: Shoulder Harness - A Suggestion
<Ted_Gladstone@compuserve.com>
>
>
> Hi All,
>
> On second thoughts, if the "Roll Over Bar" was restricted to pivot from
> horizontally back and only to the vertical, there is no need for the
> longer version pivoting from the bottom of the seat back. The bar.
locked
> in the vertical position, would hold the shoulder straps above the
> shoulder.
>
>
> Ted
> G-ZTED
>
>
|