Andrew
Are you reading the instructions right???
You are to lay three layers of glass over the wing rib/spar joint. They are
to be staggered so as to taper the ending strength. This is a reinforcing
type of task.
I remember doing this job by laying the glass up in-between plastic sheets.
Get it all laid out staggered correctly on the work bench and wet it out
using the "between two plastic sheets" method. That is what I did !
Cliff Shaw
1041 Euclid ave.
Edmonds, WA 98020
425 776 5555
----- Original Message -----
From: "Andrew Sarangan" <asarangan@YAHOO.COM>
Subject: Europa-List: Photos of wing root
>
>
> I wonder if anyone can help me locate the tapered ply-ends in my wing
> root. I have to apply the reinforcement plies over these ends.
> I took some photos of the wing root. If you click on the links below
> you can see them. Suggestions are greatly appreciated.
>
> http://131.238.38.204/~sarangan/aviation/europa/forum/canon003.jpg
> http://131.238.38.204/~sarangan/aviation/europa/forum/canon004.jpg
> http://131.238.38.204/~sarangan/aviation/europa/forum/canon005.jpg
> http://131.238.38.204/~sarangan/aviation/europa/forum/canon006.jpg
>
>
> Thanks!
>
>
>
|
