Ron,
Thanks. Sounds like a great idea. I will pull this out tomorrow and play
with it with the ohmeter.
Troy
Hi Troy,
I also have the Bendix type mag/starter switch on my panel but I have used
the spare terminal on the back to isolate one mag during starting. The
switch was, of course, originally made for the "older technology" engines
using traditional mags but that spare terminal does the same job with the
Rotax setup.
Just make up a short lead (about 4" long) and use it to bridge one of the
mag terminals to the spare. I forget which mag (A or B) is timed slightly
later than the other but you can try either mag by just switching the leads
at the connectors near the mags.>>>>>>>>
|