Matt
Yes
That is how it works. That is one of the things that made me decide to use
it. I did not have to add another device to the elevator system.
I have a relay board so the control stick and the EZ Trim operate the relays
and the relays run the motor in the servo. This is required if you install
the EZ Trim . It's output is made to energies relays.
Cliff Shaw
1041 Euclid ave.
Edmonds, WA 98020
425 776 5555
http://www.europaowners.org/WileE
( I should be doing something rather than sitting her righting Email)
> Hello all,
>
> I already have a nice AutoPilot installed, but does not support Altitude
> Hold (well it can for an extra 1000.00$).
> If I build one of these EZ trim, would I need to install a new servo? I
> have a trim servo and its LEDs, and switch all working
> great. Can the EZ trim also use the same servo? And use the already
> built in switch as a manual override?
>
> Thanks,
>
> Matt Carpenter
> A138
> Amarillo Texas
> N138WJ
|