Paul Stewart wrote:
>
>A plea for help from anyone who has used 'Superfil'. I have small areas
>which are riddled with pin holes and have tried a variety of ploys to
>get rid of them:
>
>1. Filling them with more superfil - they are still there
>
>2. Using a brushing pin hole filler (Aerodur) - they are still there
>
>3. Taking all the affected filler back to the glass and starting again -
>they are still there
>
>What is particularly irritating is that most of the surface is fantastic
>- only small localised areas are affected. Having now spent about 4
>months filling and sanding the tail planes alone, the local asylum is
>looking more inviting than the work shop. Any suggestions?
>
>Regards
>
>Paul
>
>G-GIDY
>
>
>
Paul,
I had much the same turmoil, when priming my wings. My solution was to
dab in a little primer with a toothpick. Took forever, but did the job...
--
Rocketman -
RM Holsters: http://www.rmholsters.com
FAL Gal Concealment Goods: http://www.falgal.com
Ballistic Review: http://www.ballisticreview.com
Aircraft Builders Log: http://www.N55XS.com
--
|