I had the same situation a few weeks ago, when mounting my 912S. I
ended up using the 80 degree elbow and aligning it horozonal. This gave
me the best clearence. I then sleaved the hose with heat resistant
material from Summitt Racing. Nice installation and I have confidence
that the hose is protected...
Jeff - N55XS
Prop is in the mail...
steve v. wrote:
>
>hi, can any builders tell me what an acceptable clearance is between the lower
port water pump hose and the top of the exhuast silencer assy. would be - i have
about 3/16" ( 4mm) , or should i sleeve the pipe with fire resistant material
?
>
> thanks, steve vestuti #573
>----------------
>Visit EuropaOwnersForum http://www.europaowners.org/
>
>
>
>
|