This clearance can vary depending on how far aft the cooling duct
assembly is mounted to start with. I noticed this before I fixed the
duct in position so positioned it a little further aft. I have produced
a 'Firewall Forward Tips' article for the next Europa Flyer. I will get
this included
Nigel Charles
>>-----Original Message-----
>>From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-
>>server@matronics.com] On Behalf Of steve v.
>>Sent: Tuesday, June 07, 2005 22:57
>>Subject: Europa-List: lower port water pump hose to exhuast clearance
>>
>>
>>hi, can any builders tell me what an acceptable clearance is between
the
>>lower port water pump hose and the top of the exhuast silencer assy.
would
>>be - i have about 3/16" ( 4mm) , or should i sleeve the pipe with fire
>>resistant material ?
>>
>> thanks, steve vestuti #573
>>----------------
>>Visit EuropaOwnersForum http://www.europaowners.org/
>>
>>
>>
>>
|