Hi all,
just about to bond the tri gear leg sockets into the fuselage. After setting
everything
carefully up, the manual says that the legs spread out 36.75 inch to
each side at FL70 and the height should be 413 mm but might be higher up to 19mm
. My problem is that I would have to lower the fuselage by about 10mm in order
to have the socket flanges butting to the fuselage. Just wondering what other
builders experienced here. Brian Skelly's pictures on Europaowners.org shows
the socket flanges butting neatly to the fuselage.
Thanks in advance
Michael Grass
A266 Tri Gear
Detroit, Mi
|