Good idea , Gerry. I installed all of the linings, carpets, etc. before
putting the top on. Roof liningwith the top inverted etc. It is so much
easier. The only thing to keep in mind is to not glue
some of the edges and to leave extra material, then do a final trim and glue
after fitting the top.
Karl
>From: Gerry Holland <gholland@gemini-resourcing.com>
>Reply-To: europa-list@matronics.com
>To: <europa-list@matronics.com>
>Subject: Europa-List: Interior fitment
>Date: Sat, 30 Jul 2005 19:48:40 +0100
>
><gholland@gemini-resourcing.com>
>
>Hi!
>
>I=B9m still moving forward with trimming out my Europa but have an
>observation
>to make that may help others with this task if they do it themselves.
>
>With the Cockpit Module in place and just before the top gets glued on why
>not make up the templates or some of the shapes required to upholster the
>area. You can even roughly cut out the lining if used for the baggage area
>whilst the top of cockpit is available to invert.
>
>Just an idea based on the realisation of how little room there is to work
>in
>some areas when top and Perspex fitted.
>
>Regards
>
>Gerry
>
>
|