http://www.clickbond.com/
aircraft spruce has them
will use them for the same purpose soon.
--- Jeremy Davey <EuropaFlyer_3@msn.com> wrote:
> <EuropaFlyer_3@msn.com>
>
> Folks,
>
> Has anyone out there ever come across any studs that
> can be bonded to
> fibreglass parts? I want to put P-clips on my
> aluminium fuel lines to hold
> them in place, but can=92t find suitable fixings for
> the clips as I don=92t
> always want to put holes through the piece I=92m
> attaching them to.
>
> I=92m thinking of something like an AN3-3A bolt with
> an extra large head
> intended for bonding.
>
> My alternative, I think, is to make some up out of
> AN3-3A bolts with the
> heads mounted in holes in 3mm ply, and the two ply
> faces laid up with bid.
>
> Thoughts welcome!
>
> Cheers,
> Jeremy
>
> Jeremy Davey
> Europa Monowheel 537M G-EZZA
> Europa Club Vice-Chairman, Webmaster, PFA NC
> Representative
> PFA EC Member
> =93If you can keep your head when all about you are
> losing theirs, then it is
> possible you haven't grasped the severity of the
> situation.=94
> Tail done
> Standard XS wings with mods underway
> CM installed in fuse (with airbrakes fittings)
> 1420 build hours to date
> Intended fit:
> Rotax 914 turbo, Airmaster CS fully-feathering prop
> Lots of lights, buttons, switches, gizmos, and
> alarms
>
>
>
> browse
> Subscriptions page,
> FAQ,
>
>
>
>
>
>
__________________________________
|