I did both. (oil and stronger springs) Mine really did not need the springs.
Did you cut the cable to length? I cut mine and reassembled the ends.
Cliff Shaw
1041 Euclid ave.
Edmonds, WA 98020
425 776 5555
http://www.europaowners.org/WileE
----- Original Message -----
From: BEBERRY@aol.com
To: europa-list@matronics.com
Sent: Thursday, October 20, 2005 2:31 PM
Subject: Europa-List: Throttle Cables.
Having just fitted two new (massively expensive) throttle cables to cure the
apparent problem of 'stiction', I find that nothing has changed,
Despite being meticulously careful in the fitting (no kinks etc) and
following the build manual instructions, I cannot find a way to get the
throttle
cables to operate properly i.e. the throttle will not open when the lever is
moved forward as the throttle lever spring does not overcome the friction
between inner and outer.
Any suggestions for a solution (stronger springs, oil??) would be welcomed.
Patrick
|