Steve,
I notice nobody has replied to your request for information on graphics
so I
will have a go.
I used the factory registration letters and there has been no problem
with
the size. There is a paragraph somewhere in the regulations that gives
some
relief on size if it is not practical to fit the full size. The CAA
don=92t
like the registration on the fin but there are a few aerobatic aircraft
flying around with this location.
Vehicle graphics supply is a very crowded market so you should not have
too
much trouble finding a local supplier. I used a small company in
Horsham,
my nearest town, who worked off a rough draft that I produced and they
came
to my house and fitted the decals for me. My design was simple and just
one
colour. There is no doubt this kept the costs down. There were 8
individual decals and the total cost was only UKP 170. I have attached a
picture so that you can see what I got for the money.
I was very satisfied with the result.
The company was Signs first. Tel 01403 240008
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of SteveD
Sent: 20 January 2007 22:11
Subject: Europa-List: Re: External Graphics
I'm rebroadcasting this email it didn't seem to make it to the list.
Steved.
I=92m one of the three builders of XS Tri-Gear G-CHOX. We will soon be
having
the aircraft painted shiny white, and are starting to think about the
exterior design graphics. Some questions for the forum:
1. Has any one used a UK graphic designer, and what were the costs and
results?
Any other thoughts or advice would be welcome.
Goff Moore
goffmoore@aviators.net
G-CHOX Build Group: Peter Field, Ian Swankie, Goff Moore.
www.gchox.co.uk
Visit - www.EuropaOwners.org
List
Download,
--
18/01/2007
18:47
--
20/01/2007
22:31
|