Fellow Europaphiles,
Another Mod 72 completed. Preparing for the Mod took much longer
than performing it. Pics have been posted on my build web pages (URL
in signature block). The reamer will go off to Ron P. first. Upon
return of the reamer, I will let folks know. I'll have a little kit
consisting of reamer and a can of self-etching primer ready to ship
to the next person ready to perform the mod. I am not including the
ACF-50 as I think that everyone should have a can of their own as it
needs to be re-applied with each annual inspection The kit will go
to the first person to contact me with a shipping address. I expect
that they will let the Forum know when they have completed Mod 72 and
will pass it on.
Good building and great flying,
Bob Borger
Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S
http://www.europaowners.org/N914XL
(85%) tail kit done, wings closed, cockpit module installed, pitch
system in, landing gear frame in, rudder system in, outrigger mod in,
Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar
in, flap drive in, Mod 70 done. Baggage bay in. Flaps & Main Gear
complete. Working in - 24 Instrument Panel, 25 Electrical, 30 Fuel
System, 32 Tail, 34 Door Latches & 35 Doors, 37 Finishing. Airmaster
arrived 29 Sep 05. Seat arrived from Oregon Aero. E04 interior kit
has arrived and is being installed. Waiting on Mod 72 to resume
installing the ROTAX 914.
3705 Lynchburg Dr.
Corinth, TX 76208
Home: 940-497-2123
Cel: 817-992-1117
|