Andrew
Having taken note of the amount of lead removed by other builders, I cut
1/4 from the rear face of all the weights and extended the foam arms by
the same amount.
At this stage I have my ailerons filled and primed and they will be very
close to balanced by the time I put on the shiny stuff.
Lance Sandford in OZ
>
>
> The manual does not say anything about lateral balancing of the
> aileron. I am guessing that I should attempt to make the inboard and
> outboard weights roughly equal. But I was not entirely sure about this.
>
> Since aerodynamic flutter is not something I want to fooling around
> with, I want to make sure I understand this correctly.
>
> Thank you for any input!
>
>
> Andrew Sarangan
> http://www.sarangan.org
>
>
>
|